Axial Lockers for the Wraith, SCX10 and AX10 Axles from Vanquish Products

Pictured above is the new Locker from Vanquish Products for the Axial Wraith, SCX10, and AX10.  This new locker is designed to help absorb co-linear movement which helps prolong bearing life compared to a rigid, no-slop locker.  Part number for the Vanquish Locker is VPS05990.

Wraith Axles Breaking? Here is your fix! Vanquish VVD Axles

If you have been breaking your Axial Wraith stock axles or factory universals, here is your solution.  Vanquish Products' VVD axle sets that are made from the highest grade military grade steel.  The Vanquish axles also offers more steering angle up to 50 degrees.  They are direct replacements so it is easy to install.  Like all Vanquish Products, they are made in the USA!

The also have Axle sets available for Axial SCX10 and XR10.

VPS05301 - Vanquish VVD Heavy Duty Axles for Wraith (1 Pair)
VPS05311 - Vanquish VVD Heavy Duty Axles for XR10 (1 Pair)
VPS05321 - Vanquish VVD Heavy Duty Axles for SCX10 (1 Pair)

How to Assemble Vanquish 1.9 OMF Wheels

The Vanquish 1.9 OMF Wheels are the most scale wheels available in the hobby R/C to date.  They look like the actual 1:1 wheels and are designed to allow you to change the tire just by removing 4 screws.  Here is a quick rundown on what you need and how to assemble them.

Here is what you need for a set of wheels for 1 truck:

Tools: 
 3/32" Hex Driver
1.5mm Hex Driver
A power drill with 1.5mm hex bit will help speed up the assembly

Parts:
(2) Packs of 1.9 Scaler wheel screw set (VPS05000)
(4) Beadlock Rings (Choose from different designs such as Original, Phase 5, Scallop, or IBTR)
(4) Front Rings (Choose from different colors)
(4) Rear Rings (Choose from different colors)
(4) 1.9 Clamp Rings

Step 1.

Install the small cap head screws to the inner ring of the Front Ring.  There are 12 screws per wheel.  That's where the drill comes in handy.

Step 2.

Assemble the Beadlock Ring to the Front Ring.  There are 24 screws per wheel so a power drill will definitely make it faster.  It is still easy to put in the screws manually.

Step 3.

Put the 1.9 Clamp Ring into the tire.

Step 4. (Assembling the tire onto the wheel)

Slide in the Beadlock/Front Ring assembly into the front of the tire.  Slide in the Rear Ring into the back of the tire.  Make sure the 4 screw holes in the Front Ring and the Rear Ring line up.   Push them together and use the 4 large cap head screws to secure them together.

Step 5.  (Install hex hub to the wheel)

Now you can install the Vanquish SLW hex hub onto the wheel using 6 large cap head screw from the screw set.

That is it!  Now you have the best looking wheels for your truck.  If you want to change tires, just remove the 4 large cap head screws from the back.  There are many option of rings and colors so you can really customize the look of your truck!

STRC Parts for the Axial EXO Buggy

STRC has parts for the Axial EXO Buggy.  Pictured above are just a few parts for the EXO: Steering Knuckle (top) STA80099, Rear Hub (middle) STA80104, and Caster Block (bottom) STA80106.  There are also several other parts not shown: shocks, shock caps, front shock tower, steering rack, front and rear chassis braces.  All of the parts are available in five different colors: Black, Green, Gun Metal, Orange, and Silver.

Vanquish Products Tie Rods for the Axial XR-10

Vanquish Products has new tie rods for the Axial XR-10.  There are two different versions of the tie rods: Straight (pictured top) VPS02716, and the Bent (pictured bottom) VPS02717.  Both tie rods come with two different pairs of rod ends.  One pair is designed for the Vanquish Knuckle while the other pair is designed for the stock knuckle from Axial.

New Vanquish Products Parts for the Axial Wraith and Ridgecrest

Pictured above is the new Vanquish Lower Shock Link Mounts for the Axial Wraith and Ridgecrest.  The Lower Shock Link Mounts are sold in pairs and available in two colors: Silver (part#VPS04720) and Black (part#VPS04721).

Vanquish also has new Bearing Caps for the Axial Wraith and Ridgecrest.  The Bearing Caps are sold in pairs and available in two colors: Silver (part#VPS04740) and Black (part#VPS04741).

New Axial AX-10 Parts from Vanquish Products

Pictured above is the new aluminum Axle Housing for the Axial AX-10 or SCX-10 from Vanquish Products.  The new axle is made from CNC aluminum and gives a realistic look to crawler.  The axles comes in two colors: Silver (part# VPS04470) and Black (part#VPS04471).

Vanquish also has an aluminum Axle Truss for the Axial AX-10.  The Axle Truss only works with the Axle Housing from Vanquish.  The Axle Truss is available in several colors.: Silver (part# VPS04440), Black (part# VPS04441), Red (part# VPS04442), Blue (part#VPS04443), and Green (part#VPS04444).

Battle Tanks! Tamiya 1/35 R/C Tanks

Tamiya has done it again! Their attention to details and realism is unbelievable. Driving one of these tanks is almost like the real thing! Tamiya is known for recording actual engine noise from real tanks so that their models will represent the actual tank.

These tanks kits include everything you need to have a functioning R/C tank along with sound and battle system. You just need to add batteries. You will hear engine noise, main gun firing noise and explosions when you play with other tanks in battle mode. They also use 2.4GHz radio system so you can have virtually unlimited number of tanks operation at the same time without interference.

Currently, there are four models. 48209 - German Panther Type G Late Production, 48210 - Russian Med Tank T-34-85, 48211 - German Panzerkampfwagen IV, and 48212 - US Med Sherman M4A3.

Click Here for More Information and Pricing

Tamiya RC RTR Fast Attack 2011 - 2.4GHZ

Tamiya has re-released the Fast Attack 2011 in RTR (ready to run) form (part no. TAM57828). The Fast Attack 2011 comes with a 2.4GHZ radio. The only parts needed to run are a 7.2 battery, charger, and AA batteries for the radio.

Click here for more details and pictures.

Tamiya RC RTR Blackfoot III - 2.4GHZ

Tamiya has re-released the Blackfoot III in RTR (ready to run) form (part no. TAM57825). The Blackfoot III RTR comes with a 2.4GHZ radio. The only parts needed to run are a 7.2 volt battery, charger, and AA batteries for the radio.

Click here for more details and pictures

Brake Disc Sneak Peek! Vanquish Brake Rotors and Calipers for Axial Wraith

These will the the most realistic brakes ever made for the R/C market. The details are incredible! We didn't expect anything less from Vanquish. Coming Soon!