Contact Information

SK Motion
Walnut, California
Tel: (949) 705-6668
Email: sales@skmotion.com
Web:www.skmotion.com

Thursday, September 15, 2011

Axial Wraith with Gear Differential - Improve Steering






Here is an easy DIY to improve the steering and turning radius of an Axial Wraith.

By changing the front differential from a lock diff to a gear diff, will improve the steering significantly.

You need:

1 pack of AX30390 - Axial Differential Gear Set
1 pack of AX30170 - Shaft 3x22mm (2 pcs)
1 pack of AXA1162 - O-Ring 5x1mm (10 pcs)


If you want to change the rear axle to gear differential, you just need one more pack of AX30390

Steps:

1. Open the diff cover and remove the internal diff cup.

2. Remove the diff locker. Install the O-Rings in the diff cup and the bevel gear.


3. Install the small diff gears into the diff cup. Don't forget to put back the diff gasket. Put some diff grease inside the diff cup.


4. Now you can put the diff back into the axle. It's that easy!

You will now notice your Wraith will turn much better.

2 comments:

  1. This comment has been removed by the author.

    ReplyDelete
  2. This method applies to scx10 rubicon possible?

    ReplyDelete